OBD-II Mode 6 & Mode 8 Phapang:

• Mokhoa oa 6→ Molemo ka ho fetisisa bakeng saho hlahloba mathata a nakoanaka ho hlahloba lintlha tsa tlhahlobo tse bolokiloeng.
• Mokhoa oa 8→ E sebelisoa bakeng sateko e sebetsang le taolo ya dikarolo, haholo-holo ke litsebi.

Bakeng sa tlhahlobo e nepahetseng, sheba kamehlalitataiso tse khethehileng tsa moetsile tšebelisolisebelisoa tse lumellanang tsa scan. Re na le lisebelisoa tse ling tsa scanner tse hahelletsoeng ka har'a mofuta oa 6 & 8 li rekisoa.

Mokhoa oa 6 (Liphetho tsa Tekolo ea Tlhahlobo ka Botong - Tlhokomelo e sa Tsoeleng Pele)

Tlhaloso

Mokhoa oa 6 o fana ka phihlello holiphetho tsa liteko bakeng sa li-monitor tse sa tsoelang pele- litlhahlobo tsa ho hlahloba tse sebetsang feela tlas'a maemo a itseng (mohlala, katleho ea ho fetola converter, karabo ea kutlo ea oksijene).

Morero

• Mabenkeleliphetho tsa liteko(feela/feela) bakeng sa dikarolo tse sa beheng leihlo kamehla.
• E fana kalintlha tse qaqileng tsa linomoro(mohlala, linako tsa karabelo ea sensor, menyako ea ho sebetsa hantle).
• E thusa ho hlahlobaliphoso tsa nakoanakapa ho fokotseha ha tshebetso.

Sebopeho sa Lintlha tsa Bohlokoa

• TID (Setsebi sa Teko)- E hlalosa mofuta oa tlhahlobo (mohlala, tlhahlobo ea karabelo ea sensor ea oksijene).
• CID (Identifier ea Karolo)- E khetholla karolo e lekiloeng (mohlala, Sensor ea 1 ea Banka).
• Boleng ba Teko- Lintlha tse tala kapa boemo ba ho pasa/ho hloleha (mohlala, “0″ = pasa, “1″ = hloleha).

Likopo tse Tloaelehileng

✔ Ho hlahlobakatleho ea converter ea catalytic(mohlala, TID 0×03).
✔ Ho netefatsanako ea karabelo ea sensor ea oksijene(mohlala, TID 0×05).
✔ Ho lemohaho dutla hoa tsamaiso ea mouoane(ho dutla hanyane).

Mohlala

Karabo e kang:

• TID = 0×03, CID = 0×12, Boleng = 120
  → E bolela hore sephetho sa karabelo ea kutlo ea oksijene ke120 ms(e tlameha ho bapisoa le lintlha tsa OEM).

Mokhoa oa 8 (Taolo ea Sistimi ea Boto, Teko kapa Karolo)

Tlhaloso

Mokhoa oa 8 o lumellataolo e sebetsang ya ditsamaiso tse nyane tsa koloi-e neetsa liteko, kenya likarolo, kapa lokisa liparamente.

Morero

• E qobella li-actuator (li-relay, li-valve, joalo-joalo) ho sebetsabakeng sa teko.
• E etsisa maemo(mohlala, ho bula valve ea EGR, ts'ebetso ea pompo ea mafura).
• E sebelisoa hotlhokomelo e amanang le mesi(mohlala, nchafatso ea DPF likoloing tsa diesel).

Litaelo Tse Tloaelehileng

• ON/OFF li-fan tse pholileng(ho hlahloba li-circuits tsa motlakase).
• Kenya tšebetsong pompo ea mafura(bakeng sa tlhahlobo ea khatello).
• Tsamaisa valve ea EGR(ho netefatsa motsamao).
• Qala ho nchafatsa DPF(ka dienjini tsa disele).

Lintlha Tse Bohlokoa

⚠Ka koloi e itseng- Ha se likoloi tsohle tse tšehetsang Mokhoa oa 8, 'me litaelo li fapana ho ea ka moetsi.
⚠E hloka lisebelisoa tsa setsebi- Hangata e hloka li-scanner tsa boemo ba OEM (mohlala, GM Tech2, Ford IDS).
⚠Kotsi ea polokeho- Litaelo tse fosahetseng li ka senya likarolo kapa tsa ama ho khanna.

Mokhoa oa 6 vs. Mokhoa oa 8: Liphapang tsa Bohlokoa